>>>>>>>>https://www.tangra.bg/<<<<<<<<<<<<
Home / Products / Soler & Palau Ventilators / Аксиални вентилатори за стена и за кръгъл отвор Soler and Palau AXIAL

Аксиални вентилатори за стена и за кръгъл отвор Soler and Palau AXIAL

Series HCFB/HCFT (with plastic impeller)


The series of axial fans for wall or panel installation are produced with an impeller made of fiberglass and electrical motors single phase (HCFB) and three phase (HCFT). The fan protection class is IP65, class F and built-in thermal motor protection. Operating temperature from -400C to 700C. Motors are 2, 4 and 6 poles.

 

        

For more information:

 

Series TGT

Cylindrical axial fans for installation in an air duct or building hole. Adjustable number and degree of blades of the impeller. The housing is made of hot dip galvanized and rolled steel, resistant to corrosion. They are suitable for horizontal or vertical installation. The electric motors are three-phase 2, 4 and 6 pole, 2 speeds.

 

   

 

For more information:

 

Series HCBВ/HCВT (with aluminum impeller)

 

The series of axial fans for wall or panel mounting are made with an impeller made of aluminum and are produced with single-phase (HCBB) and three-phase (HCBT) motors. The fan protection class is IP65, class F and built-in thermal motor protection. Operating temperature from -400C to 700C. Motors are 2, 4 and 6 poles.

HCBT fans are also produced in the ATEX version for explosive environments. The motors are class IP 55 class F with following versions:
- ATEX gas protection
II 2G Ex d IIB T4
II 2G Exd IIB + H2T4 (with Ex d IIC T4)
- ATEX with increased gas safety - II 2G - II T3
- ATEX dust - II 3D Ex tc IIIB T125 ° C
- ATEX conductive dust - II 3D Ex tc IIIC T125ºC (with motor IP65)
Operating temperatures for ATEX versions:
-20 ° C to + 55 ° C

If you wish to select S&P fan, please use the selection software S&P

Easyvent 
 

      

 

For more information:

 

 

Series THGT

 

Axial fans for installation in an air duct or building hole. Specially designed for high temperature operation and extremely suitable for smoke and fire ventilation. Certified for F400-120, F300-120 and F200-120 (CE Marked). Adjustable number and degree of blades of the impeller. The housing is made of hot dip galvanized and rolled steel, resistant to corrosion. They are suitable for horizontal or vertical installation. Electric motors are three-phase 2, 4, 6 and 8 poles, 2 speeds - for general ventilation and for emergency ventilation (fire and smoke removal). Protection class IP55. The motors are suitable for inverter control.

If you wish to select S&P fan, please use the selection software S&P

Easyvent
 

           

 

For more information:


Series HXM

 

Axial fans HXM are mounted on a steel panel for easier mounting on a panel, window or wall. They are made of pressed galvanized steel and protected from corrosion by beige epoxy-polyester paint. The fan motors are single-phase with IP44 class rating.

If you wish to select S&P fan, please use the selection software S&P

Easyvent.
 

    

 

 

For more information:

 

 

Series TCBB / TCBT

 

Axial cylindrical fans with aluminum blades of the impeller designed for general ventilation. ATEX explosion proof versions are also available on request. Motors are single and three-phase electric motor - 2, 4 and 6 poles. The protection classes in the different versions are IP44, IP55 and IP65.

If you wish to select S&P fan, please use the selection software S&P

Easyvent.
 

      

 

For more information:

 

 

Series HXBR / HXTR

 

АAxial wall mounted fans made of high quality galvanized steel with impeller specially designed to provide low noise levels. The range is available in single-phase (HXBR) or three-phase (HXTR) versions and electric motors with IP44 / IP54 class. Motors are 2, 4, 6, 8 and 12 poles. Three-phase

If you wish to select S&P fan, please use the selection software S&P
Easyvent.

 

    

For more information:

 

Series TTT



Axial fans with cylindrical housing and motor mounted outside the air flow. This type of fans are suitable for continuous operation with air temperatures up to 1200C. All TTT fans are available with 2 or 3 fixed positions on the impeller fins. The electric motors are class IP55, class F. The range is also available in ATEX version:
- ATEX Flameproof - gas
II 2G Ex d IIB T4
II 2G Exd IIB + H2T4 (with Ex d IIC T4)
- ATEX Increased safety - Gas
II 2G Ex II T3
- ATEX - Dust, flammable particles and nonconductive dust:
II 3D Ex tc III B T 125 ° C
-ATEX Conductive dust:
II 3D Ex tc IIIC T125ºC (with motor IP65)

If you wish to select S&P fan, please use the selection software S&P
Easyvent.

 

  

For more information:


 

 

Series HIB / HIT

 

The axial aluminum fan series are installed in a special galvanized steel box for wall mounting or building hole. At the entrance side there is a safety guard grill, and on the exhaust part mechanical movable louvre grille. The electric motors are single-phase (HIB) and three-phase (HIT), class IP 55, class F, with a thermal fuse included.

If you wish to select S&P fan, please use the selection software S&P

Easyvent.

 

 


For more information:

 

 Series CGT

Series axial fans with adjustable blade selection, mounted in a special box made of hot dip galvanized steel and internal 25mm fireproof and soundproof insulations (M0).

Explosive ATEX versions are available as follows:
- ATEX Flameproof - gas
II 2G Ex d IIB T4
II 2G Exd IIB + H2T4 (with Ex d IIC T4)
- ATEX Increased safety - Gas
II 2G Ex II T3
- ATEX - Dust, flammable particles and nonconductive dust:
II 3D Ex tc III B T 125 ° C
-ATEX Conductive dust:
II 3D Ex tc IIIC T125ºC (with motor IP65)
If you wish to select S&P fan, please use the selection software S&P

Easyvent.

 

   

For more information:

 

 

 

Series HDB / HDT

 

The CHGT axial fans are mounted in a specialized box with 25 mm fire-proof and sound insulation The fans are with variable number and degrees of the blades of the impeller and are certified for high temperature operation F400-120 and F300-120. The CHGT fans are extremely suitable for smoke and fire removal.

If you wish to select S&P fan, please use the selection software S&P Easyvent
Easyvent.
 

 

 

For more information:

 

 

Series CHGT

 

Explosion proof axial fans for mounting on a panel or building hole. They are made of galvanized steel, fitted with an internal aluminum ring and engine suspension. The whole set is protected with aluminum paint B-0920. The impeller is made from one piece of cast aluminum with a fixed blade pitch and a high temperature coating. Electric motors are single-phase or three-phase - 4, 6 and 8 poles. The protection class is IP 55, class F.

If you wish to select S&P fan, please use the selection software S&P

 Easyvent.
 

     

 

 For more information:

  

 

 

 

Applications